View 74ABT16952_132003.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74ABT16952 74ABTH16952 16-bit registered transceiver (3-State)
Product specification Supersedes data of 1995 Sep 28 IC23 Data Handbook 1998 Feb 25
Philips Semiconductors
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
FEATURES
* Two 8-bit registered transceivers * Live insertion/extraction permitted * Power-up 3-State * 74ABTH16952 incorporates bus-hold data inputs which eliminate
the need for external pull-up resistors to hold unused inputs
DESCRIPTION
The 74ABT16952 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT16952 is a dual octal registered transceiver. Two 8-bit registers store data flowing in both directions between two bidirectional buses. Data applied to the inputs is entered and stored on the rising edge of the Clock (nCPXX) provided that the Clock Enable (nCEXX) is Low. The data is then present at the 3-State output buffers, but is only accessible when the Output Enable (nOEXX) is Low. Data flow from A inputs to B outputs is the same as for B inputs to A outputs. Two options are available, 74ABT16952 which does not have the bus-hold feature and 74ABTH16952 which incorporates the bus-hold feature.
* Power-up reset * Multiple VCC and GND pins minimize switching noise * Independent registers for A and B buses * Output capability: +64mA/-32mA * Latch-up protection exceeds 500mA per Jedec Std 17 * ESD protection exceeds 2000V per MIL STD 883 Method 3015 * Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs and 200V per Machine Model
QUICK REFERENCE DATA
SYMBOL tPLH tPHL CIN CI/O ICCZ ICCL PARAMETER Propagation delay nCPBA to nAx or nCPAB to nBx Input capacitance I/O capacitance Quiescent su ly current supply CONDITIONS Tamb = 25C; GND = 0V CL = 50pF; VCC = 5V VI = 0V or VCC VO = 0V or VCC; 3-State Outputs disabled; VCC = 5.5V Outputs LOW; VCC = 5.5V TYPICAL 2.8 2.3 4 7 500 8 UNIT ns pF pF A mA
ORDERING INFORMATION
PACKAGES 56-Pin Plastic SSOP Type III 56-Pin Plastic TSSOP Type II 56-Pin Plastic SSOP Type III 56-Pin Plastic TSSOP Type II TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74ABT16952 DL 74ABT16952 DGG 74ABTH16952 DL 74ABTH16952 DGG NORTH AMERICA BT16952 DL BT16952 DGG BH16952 DL BH16952 DGG DWG NUMBER SOT371-1 SOT364-1 SOT371-1 SOT364-1
PIN DESCRIPTION
PIN NUMBER 2, 55 18, 22 3, 54, 26, 31 52, 51, 49, 48, 47, 45, 44, 43 42, 41, 40, 38, 37, 36, 34, 33 1, 56 8, 29 4, 11, 18, 25, 32, 39, 45, 53 4, 17, 30, 43 7, 22, 35, 50 SYMBOL 1CPAB / 1CPBA 2CPAB / 2CPBA 1CEAB / 1CEBA 2CEAB / 2CEBA 1A0 - 1A7 2A0 - 2A7 1B0 - 1B7 2B0 - 2B7 1OEAB / 1OEBA 2OEAB / 2OEBA GND VCC NAME AND FUNCTION Clock input A to B / Clock input B to A Clock enable input A to B / Clock enable input B to A Data inputs/outputs (A side) Data inputs/outputs (B side) Output enable inputs Ground (0V) Positive supply voltage
1998 Feb 25
2
853-1814 19018
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
PIN CONFIGURATION
1OEAB 1CPAB 1CEAB GND 1A0 1A1 VCC 1A2 1A3 1A4 GND 1A5 1A6 1A7 2A0 2A1 2A2 GND 2A3 2A4 2A5 VCC 2A6 2A7 GND 2CEAB 2CPAB 2OEAB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 1OEBA 1CPBA 1CEBA GND 1B0 1B1 VCC 1B2 1B3 1B4 GND 1B5 1B6 1B7 2B0 2B1 2B2 GND 2B3 2B4
LOGIC SYMBOL
5
6
8
9
10
12
13
14
1A0 1A1 1A2 1A3 1A4 1A5 1A6 1A7 2 3 55 54 1CPAB 1CEAB 1CPBA 1CEBA 1B0 1B1 1B2 1B3 1B4 1B5 1B6 1B7 1OEBA 1OEAB 56 1
52
51
49
48
47
45
44
43
15
16
17
19
20
21
23
24
2A0 2A1 2A2 2A3 2A4 2A5 2A6 2A7 27 26 30 2CPAB 2CEAB 2CPBA 2CEBA 2B0 2B1 2B2 2B3 2B4 2B5 2B6 2B7 2OEBA 2OEAB 29 28
2B5 VCC 2B6 2B7 GND 2CEBA 2CPBA 2OEBA
31
42
41
40
38
37
36
34
33
SH00071
SH00070
1998 Feb 25
3
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
LOGIC SYMBOL (IEEE/IEC) FUNCTION TABLE for Register nAx or nBx
1OEBA 1CEBA 1LPBA 1OEAB 1LEAB 1CPAB 2OEBA 2CEBA 2CPBA 2OEAB 2LEAB 2CPAB 56 54 55 1 3 2 29 31 30 28 26 27 1EN3 G1 1C5 EN4 G2 2C6 EN9 G7 7C11 EN10 G8 8C12 52
INPUTS nAx or nBx X L H nCPXX X nCEXX H L L
INTERNAL Q NC L H
OPERATING MODE Hold data Load data
H = High voltage level L = Low voltage level = Low-to-High transition X = Don't care XX = AB or BA NC= No change
FUNCTION TABLE for Output Enable
INPUTS INTERNAL Q X L H nAx or nBx OUTPUTS Z L H OPERATING MODE Disable outputs Enable outputs
5D 4 51 49 48 47 45 44 43 1B1 1B2 1B3 1B4 1B5 1B6 1B7 2B0 1B0
1A0
5
3 6D
nOEXX H L L
1A1 1A2 1A3 1A4 1A5 1A6 1A7 2A0
6 8 9 10 12 13 14 15 9 12D 11D 10
H = High voltage level L = Low voltage level X = Don't care XX = AB or BA Z = High impedance "off" state
42
2A1 2A2 2A3 2A4 2A5 2A6 2A7
16 17 19 20 21 23 24
41 40 38 37 36 34 33
2B1 2B2 2B3 2B4 2B5 2B6 2B7
SH00086
1998 Feb 25
4
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
LOGIC DIAGRAM
nCEAB
nCPAB nOEAB
DETAIL A CE nA0 D CP Q
Q
CE D nB0
CP
nA1 nA2 nA3 nA4 nA5 nA6 nA7 DETAIL A X 7
nB1 nB2 nB3 nB4 nB5 nB6 nB7
nCEBA
nCPBA nOEBA
SH00072
1998 Feb 25
5
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
ABSOLUTE MAXIMUM RATINGS1, 2
SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 VO < 0 Output in Off or High state Output in Low state DC output current out ut Output in High state Storage temperature range -64 -65 to 150 C VI < 0 CONDITIONS RATING -0.5 to +7.0 -18 -1.2 to +7.0 -50 -0.5 to +5.5 128 mA UNIT V mA V mA V
DC output diode current DC output voltage3
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER MIN VCC VI VIH VIL IOH IOL t/v Tamb DC supply voltage Input voltage High-level input voltage Low-level Input voltage High-level output current Low-level output current Input transition rise or fall rate Operating free-air temperature range 0 -40 4.5 0 2.0 0.8 -32 64 10 +85 LIMITS MAX 5.5 VCC V V V V mA mA ns/V C UNIT
1998 Feb 25
6
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
DC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25C MIN VIK VOH VOL VRST II Input clamp voltage High-level output voltage Low-level output voltage Power-up output low voltage3 Input leakage current Control pins VCC = 4.5V; IIK = -18mA VCC = 4.5V; IOH = -3mA; VI = VIL or VIH VCC = 5.0V; IOH = -3mA; VI = VIL or VIH VCC = 4.5V; IOH = -32mA; VI = VIL or VIH VCC = 4.5V; IOL = 64mA; VI = VIL or VIH VCC = 5.5V; IOL = 1mA; VI = GND or VCC VCC = 5.5V; VI = GND or 5.5V VCC = 4.5V, VI = 0.8V VCC = 4.5V; VI = 2.0V VCC = 5.5V; VI = 0 to 5.5V IOFF IPU/PD IIH + IOZH IIL + IOZL ICEX IO ICCH ICCL ICCZ ICC ICC Additional supply current per input pin2 74ABT16952 Additional supply current per input pin2 74ABTH16952 Quiescent supply current su ly Power-off leakage current Power-up/down 3-State output current4 3-State output High current 3-State output Low current Output High leakage current Output current1 VCC = 0V; VO or VI 4.5V VCC = 2.1V; VO = 0.0V; VI = GND or VCC; VOE = Don't care VCC = 5.5V; VO = 5.5V; VI = VIL or VIH VCC = 5.5V; VO = 0.0V; VI = VIL or VIH VCC = 5.5V; VO = 5.5V; VI = GND or Vcc VCC = 5.5V; VO = 2.5V VCC = 5.5V; Outputs High, VI = GND or VCC VCC = 5.5V; Outputs Low, VI = GND or VCC VCC = 5.5V; Outputs 3-State; VI = GND or VCC VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND -50 50 -75 500 5.0 5.0 5.0 -5.0 5.0 -70 0.5 8 0.5 5 100 100 50 50 -50 50 -180 1.5 19 1.5 100 500 -50 100 50 50 -50 50 -180 1.5 19 1.5 100 500 A A A A A mA mA mA mA A A 2.5 3.0 2.0 TYP -0.9 2.9 3.4 2.4 0.42 0.13 0.01 0.55 0.55 1.0 50 -75 A MAX -1.2 2.5 3.0 2.0 0.55 0.55 1.0 Tamb = -40C to +85C MIN MAX -1.2 V V V V V V A UNIT
IHOLD
Bus Hold current A inputs6 74ABTH16952
NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any VCC between 0V and 2.1V with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5V 10% a transition time of up to 100sec is permitted. 5. Unused pins at VCC or GND. 6. This is the bus hold overdrive current required to force the input to the opposite logic state.
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500 LIMITS SYMBOL PARAMETER WAVEFORM MIN fMAX tPLH tPHL tPZH tPZL tPHZ tPLZ Maximum clock frequency Propagation delay nCPBA to nAx, nCPAB to nBx Output enable time nOEBA to nAx, nOEAB to nBx Output disable time nOEBA to nAx, nOEAB to nBx 1 1 3 4 3 4 150 1.0 1.0 1.0 1.0 1.7 1.3 2.8 2.3 2.5 2.2 3.4 2.6 3.9 3.9 3.8 3.8 4.4 3.9 Tamb = +25C VCC = +5.0V TYP MAX Tamb = -40C to +85C VCC = +5.0V 0.5V MIN 150 1.0 1.0 1.0 1.0 1.7 1.3 4.3 4.3 4.6 4.6 5.2 4.2 MAX MHz ns ns ns UNIT
1998 Feb 25
7
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
AC SETUP REQUIREMENTS
LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25C VCC = +5.0V MIN tS(H) ts(L) th(H) th(L) ts(H) ts(L) th(H) th(L) tw(H) tw(L) Setup time nAx to nCPAB or nBx to nCPBA Hold time nAx to nCPAB or nBx to nCPBA Setup time nCEAB to nCPAB, nCEBA to nCPBA Hold time nCEAB to nCPAB, nCEBA to nCPBA nCPAB or nCPBA pulse width, High or Low 2 2 2 2 1 1.2 1.5 0.0 0.0 1.2 1.6 0.0 0.0 3.3 2.5 TYP 0.9 1.2 -1.2 -0.9 0.9 1.1 -1.1 -0.9 2.6 1.0 Tamb = -40C to +85C VCC = +5.0V 0.5V MIN 1.2 1.5 0.0 0.0 1.2 1.6 0.0 0.0 3.3 2.5 ns ns ns ns ns UNIT
AC WAVEFORMS
VM = 1.5V, VIN = GND to 3.0V
1/fMAX nCPBA or nCPAB
VM tw(H) tPHL
VM tw(L)
VM
nOEAB, nOEBA
VM tPZH
VM tPHZ VOH VOH -0.3V 0V
tPLH VM VM
nAx, nBx
VM
nAx or nBx
SH00073
SH00075
Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency
Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level
nAx, nBx nCEAB, nCEBA
nCPAB, nCPBA
1998 Feb 25
EEEEEEEEE EEE E EEEEEEEEE EEE E EEEEEEEEE EEE E
VM VM VM VM ts(H) th(H) ts(L) th(L) VM VM
nOEAB, nOEBA
VM tPZL
VM tPLZ
nAx, nBx
VM
VOL +0.3V VOL
SH00074
SH00076
Waveform 2. Data Setup and Hold Times
Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
8
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
TEST CIRCUIT AND WAVEFORMS
VCC 7.0V RL 90% NEGATIVE PULSE VM 10% tTHL (tF) CL RL POSITIVE PULSE 10% tW tTLH (tR) 90% 90% VM 10% 0V 10% 0V tTLH (tR) tTHL (tF) AMP (V) tW VM 90% AMP (V)
PULSE GENERATOR
VIN D.U.T. RT
VOUT
Test Circuit for 3-State Outputs
VM
SWITCH POSITION
TEST tPLZ tPZL All other SWITCH closed closed open
VM = 1.5V Input Pulse Definition
DEFINITIONS
RL = Load resistor; see AC CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
INPUT PULSE REQUIREMENTS FAMILY Amplitude 74ABT/H16 3.0V Rep. Rate 1MHz tW 500ns tR 2.5ns tF 2.5ns
SA00018
1998 Feb 25
9
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm
SOT371-1
1998 Feb 25
10
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm
SOT364-1
1998 Feb 25
11
Philips Semiconductors
Product specification
16-bit registered transceiver (3-State)
74ABT16952 74ABTH16952
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96 9397-750-03508
Philips Semiconductors
yyyy mmm dd 12

▲Up To Search▲

Price & Availability of 74ABT16952

	To Download 74ABT16952 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .